| Estate Range / Stove / Oven Fault Codes |
| Failure Code |
Fault Code Description |
Solution |
| F0 |
Board failure |
Replace control board (also called ERC or clock). |
| F1 |
Board failure |
Replace control board (also called ERC or clock) |
| F2 |
Oven temperature is too high |
1. Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).
2. For SELF CLEAN models: check door lock operation.
3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.
Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature. |
| F3 |
Oven temperature sensor (RTD) open |
Replace Oven temperature sensor (RTD) |
| F4 |
Oven temperature sensor (RTD) shorted |
Replace Oven temperature sensor (RTD) |
| F5 |
Board failure |
Replace control board (also called ERC or clock). |
| F7 |
Function key stuck on ERC |
Replace control board (also called ERC or clock). |
| F8 |
Board failure |
Replace control board (also called ERC or clock). |
| F9 |
Oven door lock failure |
Check wiring to door lock switch (the wire harness may be connected wrong). Check for stuck lock switch. |
