If your Top Load Washer is Leaking Check the Following Water Inlet Valve If the hose connections are good to the water inlet valve check that water is not leaking from the valve itself it is replace the water inlet valve. Drain Pump Check the drain pump housing and all hose connections. The drain pump is down under neath. To disassemble your washer follow the appropiate tutorial. Hoses can be tightened. If hoses or pump housing is leaking replace the pump assembly. Tub Seal This is in the center of the tub. The seal is inexpensive but will require some labor to install. Check the tutorials on disassembling the cabinet then remove the agitater and inner tub. Enter your model # above for a diagram or illustration. |